OPELIKA, AL. (June 3rd, 2020) - Dinan is pleased to be able to announce a new product offering being added into the catalog; Dinan Performance Engine Software for the F87 M2 w/ the N55 engine. Experience the Dinan difference today and never look back!
Part Number(s): D900-N55-M2-S1 & D900-N55-M2-S1-W
Application(s):
The Quick and Dirty (Features and Benefits):
- More Power: Dinan Stage 1: Max gains of 74 HP / 104 lb-ft of torque over stock at the crank on 104 octane. Consult the product page for performance charts for additional octanes.
- More Power: Dinan +: Max gains of 50 HP / 74 lb-ft of torque over stock at the crank on 93 octane. Consult the product page for performance charts for additional octanes.
- Limited Lifetime Warranty: Dinan Stage 1 performance software includes a limited lifetime warranty against defects in the software and provides free updates and reflashes as they become available. Labor or shipping charges are not included in the warranty.
- Factory Matching Warranty: Dinan + performance software has factory matching warranty coverage (4year / 50,000 mi), including the possibility of consequential damages.
- Access to numerous octane calibrations (91, 93, 100 and 104) depending on your needs and/or variant of tune (Stage 1 or +). Switching between mappings would require a reflash at a Dinan authorized dealer.
- No required parts. Install on a stock car and receive the full power gains.
- Full map rescaling for drivability from idle to wide-open throttle and everywhere in between.
- Top speed governor removed.
- Upgradeable from DINANTRONICS Elite.
- Retains all BMW factory engine safeguards and adds an additional safety precaution with the stationary rev limiter set to 5000 RPM.
- Torque gains drastically improve acceleration.
- Sport gauges rescaled to reflect higher than stock power output.
- Downloads through the OBD2 Port.
The Story:
Dinan has a long and storied past when it comes to engine tuning having introduced our first engine performance chip in the mid 80's - over 3 decades ago. From those early years with chips, followed by engine software and then to our own external control modules we have become experts in nearly every possible way to extract safe, reliable power from the factory powerplant. While we have long preferred the unheard of control and sophistication capable of being achieved from engine software, over the past 6 years that option was not one afforded to us. That changes now with the re-introduction to flash tuning for Dinan with the S55, and now, N55 engines.
The start of the next generation of Dinan flash tunes, the N55 calibrations are held to the same principles of the past; performance, reliability, and safety. Dinan performance engine software is so much more than just turning up the turbo boost after all. It is a fully re-tuned engine management program that maximizes power while keeping all the BMW factory safeguards in place. Protecting your BMW while giving the most performance is the definition of "Performance Without Sacrifice". Drivetrain and engine components are analyzed for strength then the calibration is tested on the dyno and in the real world for durability and drivability.
This generation of Dinan flash tunes does differ from the past however, in that there are multiple octanes to choose from depending on your needs, desires or limitations. Whether you need a tune for 91 pump gas living in California or want to experience maximum performance on 104 octane race gas at the track or something in between, chances are Dinan has an option for you.
The Dinan Stage 1 Performance Engine Software is designed for the N55 engine to yield maximum power (for a variety of different octanes), improve drivability, and remove the factory speed governor for unadulterated entertainment. The Dinan + variant of software offers these same features but also carries the signature Dinan 4yr / 50k, factory matching warranty that the brand is synonymous with.
