NEW PRODUCT RELEASE: Dinan N55 Performance Engine Software (Flash)

10 min read

NEW PRODUCT RELEASE: Dinan N55 Performance Engine Software (Flash)

10 min read

OPELIKA, AL. (April 29th, 2020) - Dinan is pleased to to be able to announce a new product offering being added into the catalog; Dinan Performance Engine Software for the BMW N55 engine on 'F' chassis platforms. Experience the Dinan difference today and never look back!

Part Number: D900-N55-S1


  • 2014-2016 F22/F23 M235i
  • 2012-2015 F30 335i
  • 2014-2016 F34 335i GT
  • 2014-2016 F32/F33/F36 435i
  • 2012-2016 F10 535i
  • 2012-2017 F07 535i GT
  • 2013-2019 F06/F12/F13 640i
  • 2013-2015 F01/F02 740i/Li
  • 2012-2017 F25 X3 35i
  • 2015-2016 F26 X4 35i
  • 2016-2018 F26 X4 M40i
  • 2014-2018 F15 X5 35i
  • 2016-2019 F16 X6 35i

The Quick and Dirty (Features and Benefits):

  • More Power: Max gains up to 105 HP / 130 lb-ft of torque at the crank on the base N55 using 104 octane. Consult the performance charts for detailed data and additional octanes.
  • Dinan Stage 1 performance software includes a limited lifetime warranty against defects in the software and provides free updates and reflashes as they become available. Labor or shipping charges are not included in the warranty.
  • Access to numerous octane callibrations depending on your needs (91, 93 and 104). Switching between mappings would require a reflash at a Dinan authorized dealer.
  • The Dinan Dual Core Intercooler is recommended for improved performance gains, regardless of octane, across the entire power band (where applicable).
  • Full map rescaling for drivability from idle to wide open throttle and everywhere in between.
  • Transmission torque limiters raised for maximum power in every gear.
  • Upgradeable from DINANTRONICS - See the product page for details.
  • Retains all BMW factory engine damage safeguards.
  • Torque gains drastically improve acceleration.
  • Downloads through the OBD2 Port - See compatability notice at the bottom of the product page.
  • Hassle free operation — Install and enjoy.

The Story:

Dinan has a long and storied past when it comes to engine tuning having introduced our first engine performance chip in the mid 80's - over 3 decades ago. From those early years with chips, followed by engine software and then to our own external control modules we have become experts in nearly every possible way to extract safe, reliable power from the factory powerplant. While we have long preferred the unheard of control and sophistication capable of being achieved from engine software, over the past 6 years that option was not one afforded to us. That changes now with the re-introduction to flash tuning for Dinan with the S55, and now, N55 engines.

The start of the next generation of Dinan flash tunes, the N55 calibrations are held to the same principles of the past; performance, reliability, and safety. Dinan performance engine software is so much more than just turning up the turbo boost after all. It is a fully re-tuned engine management program that maximizes power while keeping all the BMW factory safeguards in place. Protecting your BMW while giving the most performance is the definition of "Performance Without Sacrifice". Drivetrain and engine components are analyzed for strength then the calibration is tested on the dyno and in the real world for durability and drivability.

This generation of Dinan flash tunes does differ from the past however in that there are multiple octanes to choose from depending on your needs, desires or limitations. Whether you need a tune for 91 pump gas living in California or want to experience maximum performance on 104 octane race gas at the track or something in between, chances are Dinan has an option for you.

The Dinan Stage 1 Performance engine software is designed for the N55 engine to yield maximum power (for a variety of different octanes), improve drivability, and remove the factory speed governor for unadulterated entertainment.


256 Posts