Dinan Stage 1 Performance Engine Software/Boost Upgrade Kit for BMW Alpina B7 L X F01 F02 2011-2012 (DIY)

SKU: D900-44TB7-KIT

The results of Dinan’s tuning are nothing short of breathtaking, with the added boost and related recalibration producing maximum output of 573 horsepower at 5500 rpm and 644 lb-ft torque at 3500 rpm.

DOWNLOAD INSTALLATION INSTRUCTION HERE

Not legal for sale or use in California. 

CLICK TO VIEW APPLIED MODELS ▲
This item is worth 3 point(s) towards your Dinan Badge.
PRICE:
$1,310.60
QTY
 
Description
Specs
Pictures / Video
Warranty
Product Description
Special Note: For 2011 and 2012 model years only. For B7, B7L, B7X and B7LX. See required products.

Since the flash tune programs inception in 1996 the one requirement was that the tune needed to be installed at a Dinan authorized dealer. This forced those in the international market or those in rural areas away from our core markets to either send in their DME for a bench flash or to simply live without Dinan tuning. No one should miss out on the chance to experience a Dinan tuned BMW so for those not near an authorized Dinan dealer a solution to tune your BMW is finally available in an easy to use DIY package. Complete with the various interface cabling that is needed for the vehicle, the kit enables the end user to be able to flash their own vehicle in the comfort of their own garage. The kit will also allow the user to flash the vehicle between stock and Dinan at a moments notice whenever the need may arise. 

Note: When ordering please ensure you have your VIN ready for the checkout process. It is crucial that it is typed in accurately and completely at that time.

While we offer the DIY kits in the stage 1 form, the additional stages will need to be purchased and installed at an authorized dealer as they require hard parts to function properly. 

Software Description:

Propelling it up that notch is the Dinan Stage 1 Performance Engine Software. As always, Dinan matches the new car warranty coverage for up to 4 years or 50,000 miles, including the possibility of consequential damages. No one offers better performance or backs it up with such comprehensive warranty coverage.

The Dinan Performance Engine Software safely increases turbo-boost pressure from the stock 14.0 to 18.0 psi, along with properly retuned fuel mixtures, ignition timing and full map rescaling. In fact, over 2000 lines of code have been addressed, producing substantial increases in power output while maintaining the civility and reliability expected of a Dinan performance product.

The top speed governor is removed with Dinan’s software, the B7 will be capable of achieving its natural top speed as the governor has been removed.

The results of Dinan’s tuning are nothing short of breathtaking, with the added boost and related recalibration producing maximum output of 573 horsepower at 5500 rpm and 644 lb-ft torque at 3500 rpm.

Note: When programmed, the pressure sensors in both intercoolers must be replaced with 2x BMW #13 62 7 585 494. Refer to TIS procedures 1362591 and 1362592. These sensors are not included with the software, and must be purchased separately from your BMW dealer.

Product Specifications
Emission StatusThis product is in compliance with U.S. EPA Memorandum 1A, or this product has not been found, nor is believed to be, unlawful for use under the provisions of the Clean Air Act. Currently: This product is legal in California only for racing vehicles, which may never be used upon a highway.
Max HP Gain80
Max Torque Gain134 @ 3500 RPM
Peak Horsepower573 @ 5500 RPM
Peak Torque644 @ 3500 RPM
Peak HP Gain73 @ 5500 RPM
Peak Torque Gain128 @ 3500 RPM
Factory Rated HP500 @ 5500 RPM
Factory Rated Torque516 @ 3500 RPM
Included NotesOBD2 to Ethernet Adapter and Ethernet to USB Adapter.
Required ItemsWindows 7 or newer Laptop with a USB connector and an internet connection.

Note: When the car is programmed, the pressure sensors in both intercoolers must be replaced with 2x BMW #13 62 7 585 494. Refer to TIS procedures 1362591 and 1362592. These sensors are not included with the software, and must be purchased separately from your BMW dealer or directly from DINAN at a discount.

Cars produced 3/12 and later will also require new sensor connector housings, 2x BMW #12 52 7 513 331. These connectors are not included with the software, and must be purchased separately from your BMW dealer.
Warranty

Dinan offers you complete peace of mind by providing the only factory matching bumper to bumper warranty in the industry(most products).  More Details>>