Dinan

Dinan Cold Air Intake - 2011-2013 BMW 335is

Carbon Fiber - E92/E93

Part # D760-0031 Be the first to write a review

Dinan Cold Air Intake - 2011-2013 BMW 335is

Not Available

4

Emissions

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.

    See Emissions Details
As boost is increased through the use of performance software, the single factory intake becomes restrictive and the engine is lacking the air it needs to make maximum power. Our cold air intake force feeds the 3-liter turbocharged inline 6 with greater volumes of cool oxygen-rich air for substantial power gains by utilizing our secondary carbon fiber intake. The system is so effective that the carbon fiber inlet air temperature is a full 40 degrees Fahrenheit cooler than the incoming air from the stock inlet. Due to the increased airflow from our intake, the power-curve is extended into the higher RPMs for a noticeable change. The system is a direct replacement for the factory air box lid, employing a hand-crafted carbon fiber unit that also includes a secondary carbon fiber intake tube that captures cool air from the lower grill and includes the shielding for the conical filter to insulate it from power-robbing engine compartment heat.

Features:

  • More Power: Up to + 14 HP @ 6000 RPM, + 16 LB-FT @ 3400 RPM (coupled w/ engine software)
  • More Power: + 5 HP @ 6000 RPM, + 6 LB-FT @ 3400 RPM
  • Increased engine output across the power band
  • Carbon Fiber construction
  • Sealed system for maximum insulation from power robbing heat
  • Additional secondary inlet for additional air flow
  • Enlarged filter element for optimum flow
Brand Dinan
Dinan Point Value3
Emission Code4
7
Height12
Labor Time (Hours)3.3
Length36
Max HP Gain14 @ 6000 RPM
Max Torque (lb-ft) Gain16 @ 3400 RPM
Product TypeCold Air Intake
Weight23.2
Width24
UPC813725022086
Part NumberD760-0031
4

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

This kit requires the deletion of the auxiliary radiator in the front left of the car. A Dinan High Capacity Oil Cooler is required to maintain adequate engine cooling and warranty coverage.
Reviews

    Your Review

    *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.