High Capacity Oil Cooler System - 2011 BMW 1M
Part # D570-0822
BMW 1M comes from the factory with an auxiliary radiator smaller than a half sheet of paper. It will do little to keep the "limp mode" or heat soak away during a track day. The Dinan High Capacity Oil Cooler provides literally twice the volume of the stock unit, as well as 414 sq./in. of cooling tube vs. 112.5, and that's really just the beginning. Nicely integrated inlet ducting provides greater airflow efficiencies and the ventilation of air to the fender well has also been improved with a larger outlet. The system mounts neatly in the stock location and includes lightweight convoluted PTFE hoses with polyester outer braid fitted with race-quality fittings. The results of the oil cooler upgrade are quite significant, with the temperature gauge holding steady even under high load/high boost scenarios. And for those of you who track their cars, even occasionally, the Dinan oil cooler is a must.
- More total volume: Stock - 9.5 oz. vs. Dinan - 19 oz.
- More surface area: Stock - 45 sq./in. vs. Dinan - 67.5 sq./in.
- More cooling tubes: Stock - 10 vs. Dinan - 23
- More tube length: Stock - 90 in. vs. Dinan - 207 in.
- More tube area: Stock - 112.5 sq./in. vs. Dinan - 414 sq./in.
|Dinan Point Value||3|
|Labor Time (Hours)||5|
|Product Type||Oil Cooler|
This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.
Be the first to write a review
*Free Shipping & Handling only offered to the contiguous US on orders over $100, excludes clearance parts and oversized packages.
Some parts are not legal for use in California or other states with similar regulations.