OPELIKA, AL. (January 31st, 2023) - Dinan is pleased to be able to announce a slew of new wheels being added into the catalog; Hyper Kinetic wheels in various colors and sizes for the Tesla Model 3 and Model S. Experience the Dinan difference today and never look back!
Part Number(s): HB003-001 thru HB003-021
Application(s):
- 2017-2022 Tesla Model 3
- 2012-2022 Tesla Model S
The Quick and Dirty (Features and Benefits):
- Engineered specifically for your Tesla Model 3 or Model S with proven fitment, tire clearance, and optimized offset to fill up the wheel cavities
- Flow Formed Wheel Manufacturing Process - Produces wheels that are lighter, stronger & have a higher shock resistance (than standard cast wheels)
- Eliminates tire rubbing - With proven fitment on the Tesla Model S
- Hub Centric Mounting, ensures wheels are centered on the Tesla hub - instead of relying only on the wheel studs/lug nuts
- Assorted Sizes - With offsets optimized for the front & rear
- Choose from standard or staggered wheels - For improved traction, handling & appearance
- Choose from Anthracite or Silver finish with clear coat for durability & low maintenance
- Includes Dinan center cap - Round factory Tesla center cap can be re-Installed (if desired)
- Factory lug nuts and tire pressure monitoring system (TPMS) sensors can be reused with these wheels
- Unique front & rear wheels with offset optimized for appearance & tire clearance
- Wheels sold individually - Choose from 19, 20 or 21-inch wheel wets, depending on model, for 1) Optimal Appearance & Performance; 2) Premium Appearance; 3) Range & Rotate
- Staggered width wheels (when used with recommended tires) wested on Rear-Wheel Drive & All-Wheel Drive vehicles with success - for Improved traction & performance without setting trouble codes
The Story:
The design of Dinan Hyper Kinetic wheels was Inspired by the styling of the wheels on the Tesla Model S Plaid prototype that Tesla took to the Nurburgring. Dinan has teamed up with legendary wheel company Halibrand to produce this iconic design. These wheels are engineered for your Tesla Model 3 or Model S with ideal offsets, staggered widths, hub centric mounting, proven fitment & tire clearance. The special offsets fill the wheel openings and move the wheels out flush with the body for optimum appearance.
The Flow-Formed wheel manufacturing process applies pressure to the wheel casting while it is spinning to stretch and compress the aluminum. The finished wheel is lighter, stronger, and has a higher shock resistance & load capacity - as compared to a standard cast aluminum wheel.
Individual wheels are available in 19, 20 or 21-inch diameters with silver or anthracite finish. Specific recommended combinations are listed on the individual product pages.