
- Home /
- INTAKES & AMM'S /
- Intake Kits /
- Dinan Cold Air Intake - 2015-2021 BMW M2/M3/M4
Dinan
Dinan Cold Air Intake - 2015-2021 BMW M2/M3/M4
Part # D760-0045
Be the first to write a review
Carbon Fiber - F80/F82/F83/F87
Part # D760-0045
Be the first to write a review
Dinan Cold Air Intake - 2015-2021 BMW M2/M3/M4
Carbon Fiber - F80/F82/F83/F87
Does it fit my vehicle?
7
Emissions
This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020.
See Emissions DetailsAlso Bought
Keeping with the recent Dinan intake tradition the carbon fiber cold air intake for the F8x M2C/M3/M4 is beyond reproach. The intake makes the underhood appearance of the newest M's a work of art that could be the focal point of any car show or enthusiasts collection. While beauty is definitely a concern; efficiency and maximizing the potential of the stock intake design were the keys to development for the S55 intake. Our sealed system delivers as much cold outside air as possible to the engine by way of less resistance and a straighter freer flowing design which comes with an optimized carbon fiber tube. The increased amount of air feeds into dual larger volume airboxes complete with larger cylindrical filters that elicit a slightly more audible and sporty tone over its stock counterpart. This optimized design yields increased HP/TRQ throughout the power band and shows consistent gains over stage 1 when combined with the stage 2 DINANTRONICS Performance Tuner (where applicable).
Features:
- More Power: + 14 HP @ 6000 RPM, + 21 LB-FT @ 3000 RPM (coupled w/ engine tuning)
- Sportier Sound
- Improved throttle response
- ~20% larger volume air box that completely seals for maximum insulation from power robbing heat
- Optimized carbon fiber intake tube
- 30% larger cylindrical air filter for optimum flow
- Larger MAF housing
- Bolt-on installation
Brand | Dinan |
---|---|
Category | Air and Fuel Delivery |
Dinan Point Value | 3 |
Emission Code | 7 |
Height | 10 |
Labor Time (Hours) | 2 |
Length | 24 |
Max HP Gain | 14 @ 6000 RPM |
Max Torque (lb-ft) Gain | 21 @ 3000 RPM |
Part Type | Air Intake Kit |
Product Type | Cold Air Intake |
Sub Category | Service Kits |
Weight | 10 |
Width | 18 |
UPC | 813725022727 |
Part Number | D760-0045 |
- F39/F48/F54/F55/F56/F57/F60/F80/F82$59.95Qty:
7
This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

We Suggest
Reviews
Be the first to write a review
Your Review
Items 0 - 0 of 0
per page
Page:
- 1
Items 0 - 0 of 0
per page
Page:
- 1
*Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.
Some parts are not legal for use in California or other states with similar regulations.