1-800-341-5480
Videos
Dinan

Dinan + Performance Engine Software - BMW S58 Engine

F97/F98

Warranty

Part # D900-S58-S1-W Be the first to write a review

Dinan + Performance Engine Software - BMW S58 Engine

Suggested Retail
$1,399.95
Find a Dealer

Does it fit my vehicle?
7

Emissions

This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020.

See Emissions Details
The S58 motor, even early in its production life, is known as an immensely capable engine delivering power well beyond its advertised levels. This is typical of most modern-day BMW M platforms. What is not typical however is the copious amounts of headroom left on the table for entities like Dinan to take advantage of. Approaching, and/or exceeding, maximum gains of 100 WHP/TQ with pump gas and no additional modifications for an inline-6 is a dream that has become a reality. While increases in power via ECU upgrades in the marketplace can come at a cost to the engine's durability, this is typically due to improper calibrations that are simply after one goal regardless of engine health - maximum power. Dinan's calibrations are safe and reliable without sacrificing long-term reliability or performance. Dinan performance engine software is so much more than just turning up the turbo boost after all. It is a fully re-tuned engine management program that maximizes power while keeping all the BMW factory safeguards in place. In most cases Dinan software engineers also implement their own additional safety precautions in order to guarantee flawless performance that may not have been needed with factory power levels/programming. Protecting your BMW, while giving the most performance, is the definition of "Performance Without Sacrifice". To do just that, drivetrain and engine components are analyzed for strength, and then the calibration is tested on the dyno and in the real world for durability and drivability. This process has been a cornerstone of Dinan software development for decades and a major reason why Dinan performance tunes are often labeled as being the smoothest, factory-like solution in the marketplace. Dinan's ECU upgrades are offered in numerous configurations depending on your specific needs, desires or limitations. Whether you are limited to 91 pump gas, want to experience maximum performance on E85, or something in between, chances are Dinan has an option for you. At its core Dinan offers 2 base options; Stage 1 and Dinan +. The Dinan Stage 1 Performance Engine Software is designed for the S58 engine to yield maximum power (for a variety of different octanes), improve drivability, and remove the factory speed governor for unadulterated entertainment. The Dinan + variant of software offers these same features (albeit limited to 91/93 octane) but also carries the signature Dinan 4yr / 50k, factory matching new car warranty that the brand is synonymous with.

Features:

  • More Power: Max gains of 54 WHP / 77 lb-ft of torque over stock on Competition models with 91 octane. Consult the performance charts for additional data.
  • Dinan + performance software matches the factory new car warranty (4year / 50,000 mi) and is the warranty protection commonly associated with the Dinan brand.
  • No required parts. Install on a stock car and receive the full power gains.
  • Full map rescaling for drivability from idle to wide open throttle and everywhere in between.
  • Optimized boost control, cam phasing, lamda targeting, fueling, airflow and temperature controls for maximum power output that is also safe and reliable.
  • Retains all BMW factory engine safeguards and adds numerous additional safety protections.
  • Top speed governor (VMAX) removed.
  • Torque by gear strategies implemented for maximum power output and traction.
  • Sport mode cooling that targets lower coolant temperatures added for optimum track effectiveness.
  • Pedal feel improved to naturally align with the increased torque output.
  • Sport gauges rescaled to reflect higher than stock power output.
  • Improved 0-60 and 1/4 mile times.
Brand Dinan
Dinan Point Value3
Emission Code7
Factory Rated HP503 (619 Measured)
Factory Rated Torque (lb-ft)442 (523 Measured)
Install MethodDealer
Labor Time (Hours)0.5
Max HP Gain60 @ 4000 RPM
Max Torque (lb-ft) Gain86 @ 3500 RPM
Peak HP632 @ 6500 RPM
Peak HP Gain13 @ 6500 RPM
Peak Torque (lb-ft)598 @ 4000 RPM
Peak Torque (lb-ft) Gain70 @ 4500 RPM
Product TypeEngine Software
StageDinan +
WarrantyDinan Factory Matching (4yr/50k) Warranty
Part NumberD900-S58-S1-W
7

This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
ECU Order Form
Select BMW MG1 under vehicle type
S58 Flash Software FAQ
Compatability limited to 2020 MY and prior (specifically up to a 06/2020 build date). 2021+ MY not supported at this time. See DME unlock and compatibility notices at the bottom of the product page for information on additional potential installation/compatibility limitations.
Dinan Factory Matching (4yr/50k) Warranty: See Details

Dinan + Performance Charts

Engine / StageSelect Graph Type

Looking for non-competition data? In its base configuration the ONLY calibration difference from the competition models is an artificial reduction of power of ~20 WHP from ~5500 RPM and above. As such you can use the competition data above almost entirely but reduce the stock curves from 5500 RPM and above that amount. The result is larger gains over stock at the extreme top end of the power curve for base S58 owners (albeit the same end result).

Calibration Quick Reference

All info supplied in the table below is 'at the crank' for consistency when comparing data with BMW advertised numbers which are always reported at the crank. For data 'at the wheels' please refer to the appropriate chart from the dropdowns above.


Table also represents all possible ECU software options currently available for the selected platform. Some stages / variants may require additional hard parts to achieve advertised numbers. Please consult the appropriate stages product page for details.

S58 (Competition)
STAGE / WARRANTY / PRICE		HP (CRANK)TQ (CRANK)MAX GAINMAX GAIN
Stock as Reported by BMW503 HP 442 LB-FT 
Stock as Measured by Dinan619 HP523 LB-FT
DINAN + / 4yr/50k / $1,399.95
Dinan + (91 Octane)632 HP598 LB-FT +60 HP+86 LB-FT
STAGE 1 / Limited / $599.95
91 Octane632 HP598 LB-FT+60 HP+86 LB-FT
93 Octane683 HP659 LB-FT+107 HP+139 LB-FT
100 Octane719 HP675 LB-FT+132 HP+155 LB-FT
104 Octane743 HP685 LB-FT+142 HP+165 LB-FT
E85759 HP684 LB-FT+155 HP+163 LB-FT
Only use fuel equal to or higher than specified. Never use a lower octane fuel. Always follow our fuel guide, especially with race fuel and Ethanol, where available. Dynos are for reference only. Results will vary. Contributing factors include the vehicle condition, vehicle setup, dyno type, dyno setup, environmental factors, fuel quality, and more.

DME UNLOCK & FLASH NOTICE / HOW TO PURCHASE


2020 MY (specifically up to a 06/2020 build date) S58 DME's must be unlocked and bench flashed by Dinan. 2021+ MY vehicles are not supported at this time. While dealer / retail unlock and flashing tools are in development and will be available in the future, at present, two options are available:


OPTION 1: Visit a Dinan Dealer and purchase the Dinan Flash Software . They will remove and mail the DME to Dinan. We'll unlock the DME, flash the software and ship it back. They'll reinstall the DME.


OPTION 2: Purchase the tune. Send us your DME. We’ll unlock it, install Dinan software, and ship it back. The unlock process is free. Ground shipping to the continental USA is free. Follow the steps below if this is the course you wish to pursue.


  1. Purchase the tune by contacting Dinan via phone at 1-800-341-5480.
  2. Fill out the unlock form and select BMW under the unlock type.
  3. Mail your DME to Dinan, 4800 U.S. Hwy 280 W, Opelika, AL 36801, USA, and include the last 7 of your VIN on the outside of the box along with a copy of the unlock form inside the box.


At no time during the unlocking process is the DME opened or physically modified. Once unlocked the DME can be flashed through normal dealer tools. If the DME is flashed back to stock, it will need to be unlocked again. Also, vehicle manufacturers issue many DME part numbers and revisions throughout their vehicle lineup. As such, some DMEs may be temporarily unavailable as new parts and/or revisions are released.


CODE CLEARING: Customers doing the DME removal/install process themselves should be aware that in the case a fault code occurs, having the ability to read and erase fault codes is crucial. Failure to be able to perform this task may result in a vehicle that is inoperable. Dinan will not cover any expenses related to not being able to clear codes (towing, equipment rental, etc.).

COMPATIBILITY NOTICE


BOX CODES: The S58 engine and its multitude of variants account for numerous unique box codes across various platforms. While Dinan has created files for many of these permutations, there is a chance you may have a box code that we have not seen. If this happens to be the case we will need to create a file for your vehicle. This process could add up to 7 days to the bench flash process although in most cases it will be turned around within 2 business days.


We Suggest

Reviews

    Your Review

    *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.