DINANFLASH Handheld Tuner - BMW B58(M0) & B46 Engine
- ECU flashing at home courtesy of a palm perfect handheld device equipped with a high definition 2.8" color screen and an easily navigable graphic interface that plugs into the OBD2 port.
- One device supports and can flash Dinan software for either the B58(M0) or 'F' Chassis B46 engine.
- More Power: Max gains between 50-98 WHP / 67-120 lb-ft of torque depending on octane for the B58(M0) engine and max gains between 39-84 WHP / 54-121 lb-ft of torque depending on octane for the 'F' chassis B46 engine.
- Multiple octane calibrations (91, 93, 100 and 104) that can be flashed in moments directly from the handheld. 104 mapping only available for the B46 engine.
- Full map rescaling for drivability from idle to wide open throttle and everywhere in between.
- Optimized boost control, cam phasing, fueling, airflow and temperature controls for maximum power output that is also safe and reliable.
- Top speed governor (VMAX) removed.
- Sport gauges rescaled to reflect higher than stock power output.
- Retains all BMW factory engine safeguards and adds additional safety precautions such as the stationary rev limiter being set to 5000 RPM.
- Vehicle monitoring and logging capabilities. Up to 8 PID's monitored at a time with up to 4 displayed on screen.
- Read and clear diagnostic codes.
- One device can flash multiple VINs for maximum vehicle versatility (only one can be paired at a time).
- Upgradeable from DINANTRONICS Elite (V1 or V2) at a discounted rate via trade-in program. See the FAQ linked below for details.
- Free software updates for life via the Update Agent software.
- DINANFLASH Handhelds carry a 1 year limited warranty.
|Dinan Point Value||3|
|Factory Rated HP||320 (353 Measured)|
|Factory Rated Torque (lb-ft)||332 (347 Measured)|
|Labor Time (Hours)||0.5|
|Max HP Gain||111 @ 6500 RPM (100 Octane)|
|Max Torque (lb-ft) Gain||129 @ 3000 RPM (100 Octane)|
|Peak HP||464 @ 6500 RPM (100 Octane)|
|Peak HP Gain||111 @ 6500 RPM (100 Octane)|
|Peak Torque (lb-ft)||469 @ 3500 RPM (100 Octane)|
|Peak Torque (lb-ft) Gain||126 @ 3500 RPM (100 Octane)|
|Product Type||Hand Held Programmer|
|Warranty||Limited 1 Year Warranty|
This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
Be the first to write a review
5 out of 5 stars
*Free Shipping & Handling only offered to the contiguous US on orders over $100, excludes clearance parts and oversized packages.
Some parts are not legal for use in California or other states with similar regulations.